and any other non-chem subjects.
-
Labbie
- Posts: 2894
- Joined: 28 Nov 2006, 10:00
- Job Title: Retired
- Suburb: At Home
- State/Location: NSW
Post
by Labbie » 06 Jun 2007, 12:47
Hi folks,
We have a very old Van De Graaf Generator given to us, only last week. How would I clean it? So far I have used warm soapy water, and things are looking a little better. But the main silver dome, is awful. What would you suggest I use??
Can I use Silver cleaner?
Help

Regards Labbie
Lab Manager/Lab Tech, mind reading etc etc
Now retired

-
Lyn
- Posts: 638
- Joined: 16 May 2006, 10:00
- Job Title: Lab Assistant (Technician)
- School: St. John's College
- Suburb: Darwin
- State/Location: NT
Post
by Lyn » 06 Jun 2007, 13:11
Hi Pommy,
Use a fine steel wool to get the shine back, wipe over with damp paper towelling to get rid of any residue from the steel wool and give a final polish with paper towelling. I do this with our Van de Graaf machine before it is used each time. I must have done a good job this year because the sparks were really jumping off the surface.
Lyn
-
Slartibartfast
- Posts: 643
- Joined: 24 Oct 2006, 10:00
- State/Location: QLD
Post
by Slartibartfast » 06 Jun 2007, 13:43
Gumption! Yes the sink cleaner is designed for stainless steel and it is what we use on the dome of our Van De Graaf. Make sure you clean both inside and out for a great result. This combined with a tune - new belts, cleaned perspex tube and the combs cleaned and adjusted mircomillimeters from the belt has it producing the fattest spark you've ever seen. Experienced teaching staff claim they're afraid of using it but I reckon it's the business!!
Richard Hollinworth
Disease diagnosis and extension services
DPI&F
Biosecurity Sciences Laboratory
-
rae
- Posts: 1045
- Joined: 31 May 2006, 10:00
- School: Oxley College
- Suburb: Burradoo
- State/Location: NSW
Post
by rae » 06 Jun 2007, 13:45
Hi Pommy,
I did a major clean of ours a couple of weeks ago. I used brasso and this worked really well. The instruction manual actually said not to use anything too abrasive on the suface as you don't want to scratch it. I also pulled the whole thing apart to clean the rollers too.
The other thing to look out for is the belt. Mine is perished and needs replacing.
Good luck its a dirty job.
Lorrae

-
smiley
- Posts: 1398
- Joined: 20 Nov 2006, 10:00
- State/Location: QLD
Post
by smiley » 06 Jun 2007, 14:22
We have a brief window of opportunity to use ours, somewhere around July. The rest of the time it's just too humid!

-
Slartibartfast
- Posts: 643
- Joined: 24 Oct 2006, 10:00
- State/Location: QLD
Post
by Slartibartfast » 06 Jun 2007, 14:31
They certainly like dry windy days, not much of that where your from! The Simpson Desert High School must get a cracking result!
Richard Hollinworth
Disease diagnosis and extension services
DPI&F
Biosecurity Sciences Laboratory
-
Lyn
- Posts: 638
- Joined: 16 May 2006, 10:00
- Job Title: Lab Assistant (Technician)
- School: St. John's College
- Suburb: Darwin
- State/Location: NT
Post
by Lyn » 06 Jun 2007, 16:32
This is a message for Smiley and any others who experience the humidity of the tropics.
The Van de Graaf will work in airconditioning. We have been able to use ours all year round. Only discovered this when some bright spark insisted on doing electrostatics in February. I told them it wouldn't work and it did work.
Lyn
-
Labbie
- Posts: 2894
- Joined: 28 Nov 2006, 10:00
- Job Title: Retired
- Suburb: At Home
- State/Location: NSW
Post
by Labbie » 07 Jun 2007, 09:04
Many thanks for that site on the Van De Graaf Generator. What a great site this is.
Thank you all so much.
Regards
Regards Labbie
Lab Manager/Lab Tech, mind reading etc etc
Now retired

-
Ian
- Posts: 572
- Joined: 16 Oct 2006, 10:00
- Job Title: Lab Assistant
- School: Macarthur Anglican School
- Suburb: Cobbitty
- State/Location: NSW
Post
by Ian » 07 Jun 2007, 12:23
I know that it is not strictly speaking about Van de Graffs, but has anybody had a look at the web site
http://tesladownunder.com/index.html
Now some of THOSE sparks would make a good class dem!!!!
Ian

-
Slartibartfast
- Posts: 643
- Joined: 24 Oct 2006, 10:00
- State/Location: QLD
Post
by Slartibartfast » 07 Jun 2007, 12:45
My god! What an awesome website. The teachers I showed stood there open mouthed, well worth a look.
Richard Hollinworth
Disease diagnosis and extension services
DPI&F
Biosecurity Sciences Laboratory
-
PhysicsOne
- Posts: 25
- Joined: 18 Jul 2006, 10:00
- State/Location: NSW
Post
by PhysicsOne » 20 Jun 2007, 11:45
I have read that you should avoid grease on the belt. So I wear gloves when replacing the belt.
-
Loopy
- Posts: 562
- Joined: 08 Jun 2006, 10:00
- School: Mater Dei Catholic College
- Suburb: Wagga Wagga
- State/Location: NSW
Post
by Loopy » 28 Jun 2007, 10:37
Hi everyone,
I have just obtained a replacement belt for our older IEC model VDG by dealing directly with IEC. They have a website which has a section on technical information. Unfortunately the PDF document didn't work on VDG but they were able to send me a document on belt information such as a suggestion how to fix poor belts, a good way to test the belt, improving the combs and little bit more. You can try contacting Bernard Hodson by email thru their site <URL removed, see forum rules> and asking him to email a copy of "Belt Information for Van der Graaf Generators" or I can fax it.
Don't know if this much help but I will certainly try some of their suggestions,
Lou P.