Page 1 of 1
zinc nitrate
Posted: 13 Sep 2011, 12:34
by mtg
Due to mistakingly taking the Physics teachers advice I left the overhydrated zinc nitrate in a dessicator overnight, now it's a hard lump. I need to make a 0.1M soln and it'll cost heaps to get new lot couriered out to gippsland. any ideas? Have made dodgey one of unknown molarity.mtg
Re: zinc nitrate
Posted: 13 Sep 2011, 12:43
by Rowyrow
got a mortar and pestle? could try grinding it up it one of those? Make sure you wear you safety gear though it might get messy.
Re: zinc nitrate
Posted: 13 Sep 2011, 14:41
by lada
Yep, grind it up. Zn(NO3)2 hydrated MW 297.47. You need 29.7g in 1L of solution to make 0.1 M.
Your dried stuff could not lose the water in dessicator. You would have needed to heat it. I think, you can still use it as hydrated.
Good luck.
Lada
Re: zinc nitrate
Posted: 13 Sep 2011, 15:19
by mtg
Thanks will try. I heated a bit and it turned to a plasticcy paste and then wouldnt dissolve, and I've been labteching for 21years!!!
(My son would say I had a brain fart!!!)
And apparently any dissolvable zinc compound should work for "half-cells and the electrochemical series'. Cant wait for the holidays!!!!!mtg