Page 1 of 1
electronic balance repairer required
Posted: 03 May 2007, 15:50
by bullster
Hi All,
Can anyone recommend a repairer for an Ohaus balance which fell off a lab bench?
Someone in Sydney or Wollongong would be preffered.
thanks.
bullster
Electronic repairer
Posted: 03 May 2007, 16:56
by ri
Hi Bullster,
I would recommend asking the supplier if they have a preferred repairer but if that fails, try Serrata (9651 3033) or ISSCO (Industrial & Scientific Supply Co) on 02 9743 2588 or John Reid of Broken Bay Communications 0407 498 520.
Good Luck!
~Robyn
Posted: 04 May 2007, 08:31
by Labbie
Try Eddie Bishop in Appin on 46 31 10 56 mobile 04 29 304 492
He is good.
Regards
Posted: 04 May 2007, 12:08
by me
HI Peter,
We use National Weighing + Instruments Pty Ltd for repairs.
Ph (02) 9896 0266
Fax 1300 302 320
Unit 1 88 Magowar Rd
Girraween. N.S.W. 2145
Hope this helps.
Tracey
Posted: 04 May 2007, 13:38
by Ocker
I don't want to rain on your parade, BUT there is basically 2 parts to a balance
1. The load cells, if the balance landed pan side down they have probally "had it"
2. The electronic slope board. If either of these have gone you will get the answer, "uneconomical to repair"
Lifes a Bitch!
Posted: 07 May 2007, 08:36
by Labbie
pommy wrote:Try Eddie Bishop in Appin on 46 31 10 56 mobile 04 29 304 492
He is good.
Regards
Eddie is a ex science teacher, and will give you a quote before he start's repairing items. If you think it is too costly, he will deliver the item back unrepaired. He really is worth a look at.
Regards