disposing of Agar plates

and any other non-chem subjects.
User avatar
celia1
Posts: 51
Joined: 13 Dec 2006, 10:00
State/Location: NSW

disposing of Agar plates

Post by celia1 »

[quote]Hi All
Can anyone tell me how can i dispose of the agar plates. I have no stove to place the pressurer cooker on and i dont know if a ht plate can be used instead of a stove?
I'm open for ideas
User avatar
Whspa
Posts: 345
Joined: 01 Jun 2006, 10:00
State/Location: NSW

disposing of Agar plates

Post by Whspa »

Hi Celia

Sure, you can use the hotplate.
Seal the agar plates in an oven bag. Put the oven bag in the pressure cooker and put it on the hotplate. Get it up to pressure and give it about 20 minutes. This will sterilize the plates. Take the oven bag out of the pressure cooker (don't open it), wrap securely in newspaper and dispose of in the garbage.

Carol
User avatar
estelle
Posts: 272
Joined: 16 Jun 2006, 10:00
Job Title: VIP
School: Wollumbin High
Suburb: Murwillumbah
State/Location: NSW

Post by estelle »

Hi,
I am in the process of disposing of used agar plates, luckily for me my local hospital agrees to do it for us. I have to package them up safely and then label the box accordingly and deliver it to them. Maybe you could try that.
Also while on the subject of agar plates, I have had the senior bio class using them last week to culture substances and then put them in the incubator, I noticed when I opened the incubator after a day that there was a rather nasty smell. Can't imagine it is good for my health so I am putting a notice on the top of the cabinet to warn users to try to avoid inhaling the first lot of air that comes out (biological hazard?) when first opening the door.
cheers
Estelle
User avatar
bindi
Posts: 216
Joined: 23 Jan 2007, 10:00
State/Location: NSW

Post by bindi »

At what temperature does everyone set there incubators too? We dont allow plates to incubate over 28c.
User avatar
Whspa
Posts: 345
Joined: 01 Jun 2006, 10:00
State/Location: NSW

Post by Whspa »

We incubate at about 30 deg.
User avatar
smiley
Posts: 1398
Joined: 20 Nov 2006, 10:00
State/Location: QLD

Post by smiley »

Our local path lab allows us to buy prepared agar plates directly from them, and then disposes of the plates when we're finished with them. Actually, its the condition of sale that we must bring them back. For most pathology labs the amount of plates we use is just a drop in their ocean, and its no extra trouble to take back a bag of used plates. Can't hurt to ask!

Cheers, Kristin 8-)
User avatar
Slartibartfast
Posts: 643
Joined: 24 Oct 2006, 10:00
State/Location: QLD

Post by Slartibartfast »

We too incubate at 30 deg. Works well for us.

Richard
User avatar
Wendy
Posts: 7
Joined: 15 May 2006, 10:00
State/Location: QLD

Disposal of agar plates

Post by Wendy »

My local dental van let me put agar plates in their hazardous waste bin.
User avatar
MichPull
Posts: 40
Joined: 15 Jun 2006, 10:00
State/Location: QLD

Post by MichPull »

I dispose our agar plates by putting them in the microwave for 10 minutes in a microwave bag and then sealing that bag in another bag and then putting it in the tuckshop external waste bin.
User avatar
sues
Posts: 12
Joined: 19 May 2006, 10:00
State/Location: SA

Post by sues »

Our petri dishes are first sterilized under UV light in cabinent for 15 mins then bagged and placed in garbage :-)
User avatar
celia1
Posts: 51
Joined: 13 Dec 2006, 10:00
State/Location: NSW

Thank You

Post by celia1 »

Thanks for the info.
I also was wondering what solution everyone uses to top up the animal and insect speciments for biology.
mine are almost dry and is there a possibility o turn them into perpexes ? blocks for student to look at them and how is tit done?[quote][/quote]
User avatar
Marjan
Posts: 47
Joined: 08 Feb 2007, 10:00
State/Location: NSW

Post by Marjan »

Hi;
I top them up with methylated spirits. Hope this helps.
Marjan
User avatar
Didee
Posts: 65
Joined: 25 May 2006, 10:00
State/Location: WA

Post by Didee »

Hi
Here in WA we have to store our specimans in a 2-Phenoxyethanol and water mixture. This is because all flamable liquids (meths etc) must be stored in flamables cabinet and this mixture is inert. It was a big effort when we changed all our specimans but now it's really good. Not only can we dispay all our specimans. The 2-Phenoxyethanol do not have to cover the whole sample it is drawen up, very cost efficent.

Diana
User avatar
Labbie
Posts: 3273
Joined: 28 Nov 2006, 10:00
Job Title: Retired
Suburb: At Home
State/Location: NSW

Post by Labbie »

The CSIS package suggest we use 50% Methylated Spirits & 50% Distilled water. Each item should be labeled telling us what the contains are.

Regards
Regards Labbie

Lab Manager/Lab Tech, mind reading etc etc
Now retired :wub:
User avatar
celia1
Posts: 51
Joined: 13 Dec 2006, 10:00
State/Location: NSW

Post by celia1 »

Thanks for the info .
That will My next assignments when i have time

celia
User avatar
laurena
Posts: 14
Joined: 27 Jul 2006, 10:00
State/Location: SA

Agar Plates

Post by laurena »

We heat our agar plates at 30 degrees, and we dispose by taping plates from the beginning after they have exposed them, and then these plates are not to be opened again.

We incubate, view and then throw out by wrapping in newspaper, making sure all plates are sealed correctly and placing in a double garbage bag. Unfortunately being in a rural area, we need to go with our local disposal council.

Laurena
Waikerie High
User avatar
estelle
Posts: 272
Joined: 16 Jun 2006, 10:00
Job Title: VIP
School: Wollumbin High
Suburb: Murwillumbah
State/Location: NSW

Post by estelle »

For the safety of someone who might come across your cultures eg cleaners, council workers etc. wouldn't you at least have to heat the agar plates to kill off any unknown growths (biological hazards) before disposing of them into the garbage?
Here at work I am not allowed to dispose of them the way you do.

Estelle
User avatar
Marjan
Posts: 47
Joined: 08 Feb 2007, 10:00
State/Location: NSW

Agar plates (again!)

Post by Marjan »

Hi;
we're just doing our agar plates this week and I was wondering how to dispose them after using. I called the local microbilogy lab and asked him if he could dispose ours with their stuff but he said because they're environmetal bacteria ( students collect bacteria from rain water, garden...)
I could just wrap them up and put them in the garbage bin. no need to strilize them before disposing them (makes sens, because those bacteria are already everywhere). I wonder where do you get your bacteria from? are they bilogical or environmental?
Cheers
Marjan
User avatar
Mother
Posts: 275
Joined: 17 May 2006, 10:00
Job Title: Science lab. technician
School: Dubbo College/Senior Campus
Suburb: Dubbo
State/Location: NSW

Post by Mother »

Yep!!! here at the College we have just finished with the bacteria.agar plates
and it is ok to wrap unopened plates tightly in newspaper and tape up.Then wrap in plastic.However I always write BACTERIA WASTE very clearly for the cleaners to know what they are handling.
Cheers
Mother
User avatar
Didee
Posts: 65
Joined: 25 May 2006, 10:00
State/Location: WA

Post by Didee »

Hi
Here in WA we have to sterilise all our incubated plates (sealed) before we dispose of them. Done by putting them back into pressure cooker in oven bags and heating. We then double bag them and place in the schools skip bin.
Our students Yr 8 & 9 take surface swabs around the school as well as rain water, soil and rivers etc. We have been told (our Regional Tecnicians Group) that even though the bacterium are out there normally, we have grown them up in a concentrated form. Therefore they MAY be of danger to anyone who comes into contact with them. So we can't just throw them out willy nilly.
Takes so little time to do and you just never know.
Diana
Post Reply