Hi
this might be a dumb question, but I followed the instructions in 'the laboratory', so when the solution settles am I meant to decant that liquid into a bottle? or just do it now when its a milky colour?
thanks!
Limewater
- Labbie
- Posts: 3259
- Joined: 28 Nov 2006, 10:00
- Job Title: Retired
- Suburb: At Home
- State/Location: NSW
Re: Limewater
When the milky solution has settled down, pour a very small amount into a small beakers, get a straw and BLOW into the clear liquid, it will turn milky, or cloudy that is a test to see if it is ready to use. The teacher should know, that once you have invented it or shaken it, and its settled down, not to shake it again. So we would send the whole 2.5 L bottle into class.
Regards Labbie
Lab Manager/Lab Tech, mind reading etc etc
Now retired
Lab Manager/Lab Tech, mind reading etc etc
Now retired
Re: Limewater
Wonderful, thanks Labbie
- Labbie
- Posts: 3259
- Joined: 28 Nov 2006, 10:00
- Job Title: Retired
- Suburb: At Home
- State/Location: NSW
Re: Limewater
I have merge because of the limewater still, it may help.
Regards Labbie
Lab Manager/Lab Tech, mind reading etc etc
Now retired
Lab Manager/Lab Tech, mind reading etc etc
Now retired
- Labbie
- Posts: 3259
- Joined: 28 Nov 2006, 10:00
- Job Title: Retired
- Suburb: At Home
- State/Location: NSW
Re: Limewater
You are most welcome Emma.hunt
Regards Labbie
Lab Manager/Lab Tech, mind reading etc etc
Now retired
Lab Manager/Lab Tech, mind reading etc etc
Now retired
-
- Posts: 1548
- Joined: 12 Mar 2013, 08:10
- Job Title: Labbie
- School: Wollondilly Anglican College
- Suburb: Tahmoor
- State/Location: NSW
Re: Limewater
Slightly different here but I do the same as Sunray and Wayne mentioned (from years ago). So I have a stock solution which is what I have made using the instructions in The Laboratory (also previously mentioned) and I have one or two working solution bottles. I carefully pour the liquid from the stock bottle into the working bottle - I stop once I see the bottom layer of calcium hydroxide start to get stirred up. I send the working solution into the class, the stock solution stays in the chem store.
If I decant any, I refill the stock bottle with water, give it a shake and let it settle again before using.
If I decant any, I refill the stock bottle with water, give it a shake and let it settle again before using.
Re: Limewater
I do the same, Merilyn.Merilyn1 wrote: ↑11 Sep 2019, 11:46 Slightly different here but I do the same as Sunray and Wayne mentioned (from years ago). So I have a stock solution which is what I have made using the instructions in The Laboratory (also previously mentioned) and I have one or two working solution bottles. I carefully pour the liquid from the stock bottle into the working bottle - I stop once I see the bottom layer of calcium hydroxide start to get stirred up. I send the working solution into the class, the stock solution stays in the chem store.
If I decant any, I refill the stock bottle with water, give it a shake and let it settle again before using.
Regards
remlap12
science support and problem solver
remlap12
science support and problem solver
-
- Posts: 578
- Joined: 28 Jan 2021, 13:24
- Job Title: Lab Assistant
- School: MCS
- State/Location: NSW
Re: Limewater
I'm trying to set up my lime water still... Does anyone know what size rubber bung with 2 holes fits in the top of a winchester? I have ones that are too big or two small. I did find a cork one that fits (no holes) but none of the measurements match any of the 2 hole rubber bung options I've found online. How hard is it to put your own holes in with a cork borer? I think the cork would disintegrate because the holes would be too close together at the bottom. The diameter of the top of the winchester is about 28mm.
-
- Posts: 578
- Joined: 28 Jan 2021, 13:24
- Job Title: Lab Assistant
- School: MCS
- State/Location: NSW
Re: Limewater
Never mind - I found the right size sold individually at wiltronics, of all places!RosalieL wrote: ↑05 Mar 2024, 09:30 I'm trying to set up my lime water still... Does anyone know what size rubber bung with 2 holes fits in the top of a winchester? I have ones that are too big or two small. I did find a cork one that fits (no holes) but none of the measurements match any of the 2 hole rubber bung options I've found online. How hard is it to put your own holes in with a cork borer? I think the cork would disintegrate because the holes would be too close together at the bottom. The diameter of the top of the winchester is about 28mm.